ear47mtete|2020D4119D38|logicpower_db|lpr_productMaster|pr_desc|0xfdff870d00000000c007000001000100
Congratulations on your purchase of the AVR® STK500 Flash
Microcontroller Starter Kit. The STK500 is a complete starter kit and
development system for the AVR Flash Microcontroller from Atmel Corporation. It
is designed to give designers a quick start to develop code on the AVR and for
prototyping and testing of new designs.
·
The system software currently supports the
following devices in all speed grades:
·
ATtiny11 AT90S4433
·
ATtiny12 AT90S4434
·
ATtiny15 AT90S8515
·
ATtiny22 AT90S8535
·
ATtiny28 ATmega8
·
AT90S1200
ATmega16
·
AT90S2313
ATmega161
·
AT90S2323
ATmega163
·
AT90S2333
ATmega323
·
AT90S2343
ATmega103(1)
·
AT90S4414
ATmega128(1)
·
Note: 1. In external target or in STK501,
devices do not fit into the sockets of
·
STK500.
- ·
STK500
starter kit evaluation board
o (2 pcs) 10-wire cables for I/O ports and
parallel mode programming
o (1 pc) 6-wire cable for In-System Programming
o (4 pcs) 2-wire cable for UART and DataFlash
connections
- ·
Atmel
CD-ROM with datasheets and software
- ·
AT90S8515-8PC
sample microcontroller
The minimum hardware
and software requirements are:
·
486
processor (Pentium® is recommended)
·
16 MB
RAM
·
12 MB
free hard disk space (AVR Studio)
·
Windows®
95/98/2000/ME and Windows NT® 4.0 or higher
·
115200
baud RS-232 port (COM port)
·
10 - 15V
DC power supply, 500 mA min
Product
Features
- RS232 Interface to PC for
programming and control
- Regulated power supply for
10-15V DC power
- Sockets for 8-pin, 20-pin,
28-pin and 40-pin AVR devices
- Parallel and Serial High
Voltage programming of AVR devices
- Serial In-System
Programming (ISP) of AVR devices
- In-System Programmer for
Programming AVR devices in External Target System
- 8 Push-buttons for general
use
- 8 LEDs for general use
- All I/O ports easily
accessible through pin header connectors
- Additional RS232 port for
general use
- Expansion connectors for plug-in
modules and prototyping area